Demand Pesticides Solutions
Our best pesticides products provide you with specific farmland solutions,including Herbicides,Insecticides,Fungicides and
Plant regulator.
720g/l Chlorothalonil SC
Product Performance :
The product is a highly efficient and broad-spectrum protective fungicide. Its core active ingredient is chlorothalonil, and formulated as a suspension concentrate (SC). With the characteristics of “high content, easy dispersion, and strong adhesion”, widely used in the prevention and control of crop diseases in agriculture, and it is both safe and practical.
Technical requirements for use:
Chlorothalonil mainly plays a protective role and needs to be sprayed before the disease occurs or in the early stage of the disease; avoid applying the pesticide during high temperature and strong light periods, generally choose to apply it before 10 am or after 4 pm. The temperature during application should be between 5℃-30℃, and the relative humidity should be between 60%-90%; also pay attention to the safe interval period, stop using the pesticide 7-10 days before vegetable harvest and stop using the pesticide 14 days before fruit tree harvest to avoid excessive pesticide residues.
Scope of application and usage method：
50% Carbendazim WP
Product Performance :
This product is a broad-spectrum, systemic benzimidazole fungicide with both protective and therapeutic effects. It works by inhibiting the cell division and growth of pathogens, widely used in grains, vegetables, fruit trees, flowers etc. crops, can control a variety of fungal diseases.
Technical requirements for use:
When spraying, ensure even coverage of the crop’s leaves (front and back), stems, and fruit. For diseases affecting the underside of leaves, adjust the nozzle angle to focus spraying. Choose clear, calm, or breezy weather, and apply the pesticide before 9:00 AM or after 4:00 PM. Avoid periods of high temperature and strong sunlight to prevent rapid evaporation and possible pesticide damage. If heavy rain occurs within four hours of application, re-spray once after the rain stops, reducing the pesticide dosage by half (to avoid over-concentration).
Scope of application and usage method：
50% Fipronil WP
Product Performance :
Fipronil is a broad-spectrum insecticide from the phenylpyrazole family. It acts primarily through ingestion, with secondary contact and systemic activity. It is particularly effective against common pests like Borers, locusts, flee beetles, thrips, cockroaches, and termites. It is widely used on rice, corn, vegetables, sugarcane, turf and Golf Courses.
Technical requirements for use:
1. Spraying: Method: Use knapsack sprayers, motorized mist blowers, or boom sprayers for even foliar spray. Key Point: Ensure the liquid covers the plants, especially the areas where pests are active and feeding (e.g., the front and back of leaves, stems).
2. Other Important Application Methods: Seed Treatment: This is a very important and efficient method. Dressing seeds or using seed coatings can control soil pests and seedling pests while reducing direct contact with non-target organisms. Soil Treatment: Applying granules or drenching the soil to control soil pests, root maggots, termites, etc. Baits: Used for controlling public health pests like cockroaches and ants. The insecticide is mixed with bait to attract and poison the pests.
Scope of application and usage method：
0.4% Paclobutrazol SL
Product Performance :
Gibberellin is the primary hormone that promotes cell elongation and leads to excessive growth. Paclobutrazol is a triazole-class plant growth regulator that inhibits the synthesis of gibberellin in plants. 0.4% Paclobutrazol Soluble Liquid is a low-concentration plant growth regulator formulation. Its core function is to inhibit excessive vegetative growth, promote reproductive growth, and mold ideal plant architecture, thereby laying the foundation for improved crop yield and quality.
Technical requirements for use:
0.4% Paclobutrazol SL must be applied during the initial or peak stage of the most vigorous vegetative growth to achieve a preventative effect. The optimal temperature range is 15°C – 30°C. It can by applied by using a sprayer with good atomization to apply an even and thorough spray to the stems and leaves. The foliage should be fully wetted but not to the point of runoff. Ensure the growing points are covered. Or for deep-rooted crops like fruit trees, the chemical can be applied by soil drenching into circular trenches around the roots. This method provides longer-lasting effects but requires attention to residue impacts on subsequent crops.
Scope of application and usage method：
95% Mepiquat
Product Performance :
95% Mepiquat is a high-purity technical grade plant growth regulator. It is typically not applied directly in the field but serves as a key raw material for formulating various end-use products (e.g., 250 g/L soluble concentrates). Its core function is that of a systemic plant growth retardant, primarily acting by inhibiting gibberellin biosynthesis, ultimately leading to controlled excessive growth, optimized plant architecture, and increased yield.
Technical requirements for use:
95% Mepiquat end use formulations must be applied during the initial or critical stage of the most vigorous vegetative growth to “control the upper part and promote the lower part,” acting preventively. The optimal temperature range is 20°C – 30°C. Application when field air humidity is higher favors leaf absorption and improves efficacy. If it rains within 6 hours of application, consider reapplying.
Scope of application and usage method：
200g/L Chlorantraniliprole SC
Product Performance :
A highly effective, low-toxic insecticide with Chlorantraniliprole as its core active ingredient. It is formulated as an SC formulation and has low toxicity to beneficial organisms such as bees and birds, and has a good preventive effect on a variety of lepidopteran pests.
Technical requirements for use:
By binding to the ryanodine receptors in the pest’s muscle cells, the calcium ion channels remain open, causing a large amount of calcium ions stored in the cells to be released into the sarcoplasm, triggering continuous contraction of the insect’s muscles, which in turn leads to muscle regulation weakness and paralysis, making it impossible for the insect to move and feed normally, and eventually die from energy exhaustion.
Scope of application and usage method：
20% Acetamiprid SL
Product Performance :
The core active ingredient of this agent is Acetamiprid, which is formulated in the form of a soluble concentrate and has high solubility, strong systemic absorption, rapid effect and long-lasting effect. There is no need to wait for disintegration, and a stable liquid is directly formed after adding water. It has good atomization effect and strong spreadability. It is a systemic insecticide for soil and branches and leaves, and has a certain mite-killing effect.
Technical requirements for use:
20% acetamiprid soluble concentrate is one of the most widely used formulations of nicotinoid insecticides. It interferes with the nicotinic acetylcholine receptors in the insect nervous system, blocks nerve signal transmission, and causes pests to die due to inability to feed. It is suitable for a variety of crops such as vegetables, cotton, and field crops. It can evenly adhere to the front and back of crop leaves and has good permeability.
Scope of application and usage method：
70% Imidacloprid WDG
Product Performance :
The core active ingredient of this agent is imidacloprid, which is formulated in a water-dispersant (WDG) and adopts advanced airflow crushing and boiling granulation technology. It has rapid disintegration, high suspension rate, high utilization rate, and is environmentally friendly. It is mainly used to control piercing-sucking pests and some underground pests.
Technical requirements for use:
BIts active ingredient, imidacloprid, is a nicotine-based super-efficient insecticide that kills pests by specifically binding to insect nicotinic acetylcholine receptors, interfering with the normal conduction of nerve impulses. It has the characteristics of broad spectrum, high efficiency, low toxicity, low residue, and pests are not easily resistant to it.
Scope of application and usage method：
2,4 D 80% WP
Product Performance :
This product is a selective herbicide with high safety for gramineous crops,can kill broadleaf weeds without affecting the normal growth of crops. It belongs to the phenoxycarboxylic acid herbicide. It is absorbed through the leaves and translocates to the meristem, causing abnormal growth of plants, resulting in stem curling, leaf withering and plant death.
Technical requirements for use:
The four core principles of “crop adaptation period, weed sensitivity period, precise dosage, and safety protection” must be strictly followed to ensure weed control effectiveness and avoid pesticide damage. For broadleaf weeds, the best control period is when the weeds have 2-4 leaves (seedling stage). At this time, the weeds absorb the pesticide quickly and have weak drug resistance, resulting in the highest weed control rate.
Scope of application and usage method：
Xinye Pesticide Supply Services
XINYE provides a curated range of specialized services to address the unique needs of different clients in the agricultural sector. For influential agricultural brands, we deliver customized product alignment solutions paired with regulatory-compliant labeling—ensuring offerings match brand standards and regional market requirements seamlessly. For small to medium-sized businesses, we offer end-to-end branding support: from product positioning and visual identity design to basic market entry guidance, streamlining the process of building a recognizable presence. Whether you’re a large brand seeking refined, brand-aligned product services or a growing enterprise aiming to establish market visibility, our industry-specific expertise is tailored to fuel your success!